Category Archives: Vizio TV wall mount brackets

By visiting Wall Mount World Blog you will view the latest information available for Vizio flat screen TV wall mount brackets and accessories. Shop online safely and securely.

33in Extension 180 deg swivel wall mount for Samsung UN65JS8500FXZA 65″ Smart TVs

In the market for a wall mounting bracket that is very maneuverable.  Look at this Samsung UN65JS850DFXZA ready full motion wall mount with  33″ extension. This TV mount with its 33″ long arm offers maximum adjust ability, 180º of left right swivel, as well as tilt capabilities.

 

  • 120 lb. maximum weight capacity
  • VESA 400x400mm ready
  • 33″ maximum arm extension from wall
  • 3.6″ minimum extension from wall (collapsed)
  • 180 deg swivel
  • -15/+1 deg tilt
  • 6″ lateral shift left or right of center
  • Attaches to studs on 16″ centers
  • Wall plate dimensions 19″ H x 12.5″ W
Samsung UN65JS8500FXZA wall mount bracket with 33in extension
Samsung UN65JS8500FXZA wall mount bracket with 33in extension

 

Jerry Jeansonne
Wall Mount World
9228 Linwood Ave Ste K
Shreveport LA 71106
318-423-2831
https://www.wallmountworld.com

What is meant by TV mounting hole VESA

How to determine if a particular wall mounting bracket will fit a TV is a common question that we all must answer when purchasing a mount to hang our TV on the wall.

1. What is the VESA hole mounting pattern on the back of the TV for attaching a mounting bracket?

2. How much does the TV weigh without the stand?

Lets start with a little history about VESA. The VESA standard defines dimensions of a display’s four-hole attachment interface and the screws used to fit those holes. It also dictates the placement of the hole pattern on the back of the display. For attachment to VESA mounts, this invariably means the hole pattern should be centered on a display’s back but as of lately some manufacturers have positioned them not only to the middle but maybe near the top portion or at the bottom portion.

VESA 75/100 compliant displays are equipped with either a 75 x 75 mm or100 x 100 mm mounting hole pattern, using M4 or M5 screws. This is the most common interface for small TVs and computer monitors 15″ – 22″ weighing under 30 lbs (14 kg).

VESA 200 compliant displays are equipped with a 200 x 200 mm mounting hole pattern, using M4 and M5mm screws. Mid-size flat panel displays 26″ to 40″ often use this interface; typical displays in this class weigh less than 50 lbs (23 kg).

VESA 400/600 compliant displays have varied hole patterns that are spaced in 200 mm increments (e.g., 400 x 200 mm, 600 x 400 mm or 800mm  x 200mm), using M6 or M8 screws. Large displays with screens greater than 40″ in size follow this variant. In practice, many displays in this class deviate from the standard in minor ways. For example, a 300 x 300 mm hole pattern is not uncommon.

When you have your TV at home, check the packaging and instructions to see if tells you the VESA mounting pattern size up front. If not, get out the tape measure. In general, the hole patterns are measured in millimeters. The “Standard” is the measurement (in millimeters) of the distance between the horizontal mounting holes and the vertical mounting holes (for example: 100mm x 100mm ( 3-15/16″ x  3-15/16″)or 200mm x 200mm (7-7/8″ x 7-7/8″). Some TVs and Mounts have more than one hole pattern to be flexible and compatible to several standards so measure carefully. Once you know the vertical and horizontal measurement, you can then choose a mount that is compatible with that VESA hole pattern.  If your tape measure will only measure in inches – you can convert to millimeters by multiplying the inches by 25.4 or you can Google convert mm to in.

If the mount you want does not have the VESA pattern to fit your TV contact us so we can help determine if there are adapter plates that can adapt to fit it.

Measuring up and down TV mounting holes to determine VESA
Measuring the vertical up/down hole spacing to determine VESA
Measuring across TV mounting holes to determine VESA
Measuring across between the mounting holes to determine VESA

 

TV mount adapter plate location
Making sure that there is no adapter plate interference with plugins

 

TV mount VESA
Recap of TV VESA mounting holes pattern

 

 VESA conversion:

50mm = 1.96″ (1 31/32″)

75mm = 2.95″ (2 61/64″)

100mm = 3.93″ (3 15/16″)

200mm = 7.87″ (7 7/8″)

300mm = 11.81″ (11 13/16″)

400mm = 15.74″ (15 3/4″)

500mm = 19.68″ (19 11/16″)

600mm = 23.62″ (23 5/8″)

800mm = 31.49″ (31 1/2″)

Safety Note; One important part to not overlook when mounting any TV is will the mounting surface walls ,ceiling or cabinet support the load being applied to it with a TV hanging from it.

If you have any questions about whether the TV you  currently or or thinking about purchasing will fit any of our mounts please contact us and we will help guide you in the proper mount selection based on your needs. For all your flat panel mounting needs visit us at Wall Mount World.

Jerry Jeansonne
Wall Mount World
9228 Linwood Ave Ste K
Shreveport LA 71106
318-423-2831
https://www.wallmountworld.com

Wall Mount World – High security lockable wall mount bracket for Samsung UN32H6350AFXZA 32″ H6350 Smart LED TVs – 5 Star rated

Stop thieves cold with the highest security wall mount on the market for a Samsung UN32H6350AFXZA H6350 Smart LED TV- 32” Class (31.5” Diag.).  Wall Mount World bring you this anti theft key locking flush TV wall mount that  is the absolute ultimate in locking TV wall brackets. With the anti theft covers locked in place, access to the mounting screws and bolts are not even visible deterring would be thieves. To remove your Samsung UN32H6350AFXZA they would essentially have to pry it off the wall. When installed, simply put it protects your investment.

Samsung UN32H6350AFXZA wall mount bracket requirements:
VESA 200x200mm compatible
Support 11.2 lbs (weight without stand)

 

Samsung UN32H6350AFXZA  high security locking wall mount bracket
Samsung UN32H6350AFXZA high security locking wall mount bracket

 

 

 

 

 

 

Fits Samsung Model: UN32H6350AFXZA
Mount Type: Fixed position, flat
Weight capacity: 150lb (68.0kg)
Fits VESA mounting pattern: 200x200mm
Depth from wall 1″
Anti Theft Locking System: Key Lockable slide on covers
Mounting surface: wood stud
Stud spacing: Dual stud 16″
Construction: high-grade steel

 

Ultra Flat TV Wall Bracket for VIZIO E420i-A0 E-Series 42” LED TV (42.02″ Diag.)

Looking for a  VIZIO E420i-A0 E-Series 42” LED TV  ready ultra flat wall mount that is the ultimate in a low profile mounting solution. At Wall Mount World we made it simple to use using the “hook and click” installation with built-in kickstand feature that allows easy access for wiring behind your VIZIO E420i-A0 when mounted on the wall.

VIZIO E420i-A0 wall mount requirements:
VESA 200x200mm compatible
Support 21.3 lbs

  • Click in place screen placement without use of tools
  • VESA 200x200mm ready
  • Low-profile, holds screen close to wall for a clean look
  • Built-in kickstand feature allows easy access for wiring
  • Pre-sorted hardware pack for easy installation to wood studs or concrete surfaces included

Features

Fits Vizio Model: E420i-A0
VESA 400x400mm compatible: Yes
Max VESA mounting pattern: 401x401mm
VESA mounting patterns: 75x75mm, 100x100mm, 200x100mm, 200x200mm, 200x300mm, 200x400mm, 300x200mm, 300x300mm, 300x400mm, 400x200mm, 400x300mm, 400x400mm
Depth from wall: 0.39″ (10mm)
Weight capacity:: 80lb (36kg)
Mounting surface: wood stud, concrete, cinder block or metal stud (accessory required)
Stud spacing: dual stud 16” on center
Construction: high-grade cold rolled steel
Product finish: scratch resistant epoxy powder coat
Mounting Hardware: Yes
Color: Black
Warranty: 10-years

Ultra Flat TV Wall Bracket for VIZIO E420-A0 E-Series 42” LED TV (42.02″ Diag.)

Looking for a  VIZIO E420-A0 E-Series 42” LED TV  ready ultra flat wall mount that is the ultimate in a low profile mounting solution. At Wall Mount World we made it simple to use using the “hook and click” installation with built-in kickstand feature that allows easy access for wiring behind your VIZIO E420-A0 when mounted on the wall.

VIZIO E420-A0 wall mount requirements:
VESA 200x200mm compatible
Support 21.2 lbs

  • Click in place screen placement without use of tools
  • VESA 200x200mm ready
  • Low-profile, holds screen close to wall for a clean look
  • Built-in kickstand feature allows easy access for wiring
  • Pre-sorted hardware pack for easy installation to wood studs or concrete surfaces included
Vizio-E420-A0 low profile-wall mount bracket
Vizio-E420-A0 low profile-wall mount bracket

Features

Fits Vizio Model: E420-A0
VESA 400x400mm compatible: Yes
Max VESA mounting pattern: 401x401mm
VESA mounting patterns: 75x75mm, 100x100mm, 200x100mm, 200x200mm, 200x300mm, 200x400mm, 300x200mm, 300x300mm, 300x400mm, 400x200mm, 400x300mm, 400x400mm
Depth from wall: 0.39″ (10mm)
Weight capacity:: 80lb (36kg)
Mounting surface: wood stud, concrete, cinder block or metal stud (accessory required)
Stud spacing: dual stud 16” on center
Construction: high-grade cold rolled steel
Product finish: scratch resistant epoxy powder coat
Mounting Hardware: Yes
Color: Black
Warranty: 10-years