Images

What is meant by TV mounting hole VESA

How to determine if a particular wall mounting bracket will fit a TV is a common question that we all must answer when purchasing a mount to hang our TV on the wall.

1. What is the VESA hole mounting pattern on the back of the TV for attaching a mounting bracket?

2. How much does the TV weigh without the stand?

Lets start with a little history about VESA. The VESA standard defines dimensions of a display’s four-hole attachment interface and the screws used to fit those holes. It also dictates the placement of the hole pattern on the back of the display. For attachment to VESA mounts, this invariably means the hole pattern should be centered on a display’s back but as of lately some manufacturers have positioned them not only to the middle but maybe near the top portion or at the bottom portion.

VESA 75/100 compliant displays are equipped with either a 75 x 75 mm or100 x 100 mm mounting hole pattern, using M4 or M5 screws. This is the most common interface for small TVs and computer monitors 15″ – 22″ weighing under 30 lbs (14 kg).

VESA 200 compliant displays are equipped with a 200 x 200 mm mounting hole pattern, using M4 and M5mm screws. Mid-size flat panel displays 26″ to 40″ often use this interface; typical displays in this class weigh less than 50 lbs (23 kg).

VESA 400/600 compliant displays have varied hole patterns that are spaced in 200 mm increments (e.g., 400 x 200 mm, 600 x 400 mm or 800mm  x 200mm), using M6 or M8 screws. Large displays with screens greater than 40″ in size follow this variant. In practice, many displays in this class deviate from the standard in minor ways. For example, a 300 x 300 mm hole pattern is not uncommon.

When you have your TV at home, check the packaging and instructions to see if tells you the VESA mounting pattern size up front. If not, get out the tape measure. In general, the hole patterns are measured in millimeters. The “Standard” is the measurement (in millimeters) of the distance between the horizontal mounting holes and the vertical mounting holes (for example: 100mm x 100mm ( 3-15/16″ x  3-15/16″)or 200mm x 200mm (7-7/8″ x 7-7/8″). Some TVs and Mounts have more than one hole pattern to be flexible and compatible to several standards so measure carefully. Once you know the vertical and horizontal measurement, you can then choose a mount that is compatible with that VESA hole pattern.  If your tape measure will only measure in inches – you can convert to millimeters by multiplying the inches by 25.4 or you can Google convert mm to in.

If the mount you want does not have the VESA pattern to fit your TV contact us so we can help determine if there are adapter plates that can adapt to fit it.

Measuring up and down TV mounting holes to determine VESA
Measuring the vertical up/down hole spacing to determine VESA
Measuring across TV mounting holes to determine VESA
Measuring across between the mounting holes to determine VESA

 

TV mount adapter plate location
Making sure that there is no adapter plate interference with plugins

 

TV mount VESA
Recap of TV VESA mounting holes pattern

 

 VESA conversion:

50mm = 1.96″ (1 31/32″)

75mm = 2.95″ (2 61/64″)

100mm = 3.93″ (3 15/16″)

200mm = 7.87″ (7 7/8″)

300mm = 11.81″ (11 13/16″)

400mm = 15.74″ (15 3/4″)

500mm = 19.68″ (19 11/16″)

600mm = 23.62″ (23 5/8″)

800mm = 31.49″ (31 1/2″)

Safety Note; One important part to not overlook when mounting any TV is will the mounting surface walls ,ceiling or cabinet support the load being applied to it with a TV hanging from it.

If you have any questions about whether the TV you  currently or or thinking about purchasing will fit any of our mounts please contact us and we will help guide you in the proper mount selection based on your needs. For all your flat panel mounting needs visit us at Wall Mount World.

Jerry Jeansonne
Wall Mount World
9228 Linwood Ave Ste K
Shreveport LA 71106
318-423-2831
https://www.wallmountworld.com

Wall Mount World Samsung UN32H6350AF H6350 Smart LED TV wall mount with 33″ extension, incredible 180 deg swivel left/right

Super Deal  on one of  our newest Samsung UN32H6350AF H6350 Smart LED TV- 32” Class (31.5” Diag.) articulating wall mount. This incredible articulating wall mount bracket features an unheard of 33.5″ extension, 180º of side to side swivel, as well as adjustable tilt capabilities. All of this said makes it one of the most flexible Samsung UN32H6350AFfull motion wall mounts on the market today.  Great for use in cabinets,  armoire or viewing around the corner in another room.

Samsung UN32H6350AF wall mounting bracket requirements:
Support TV weight without stand 11.2 lbs
VESA hole mounting pattern 200x200mm

 

Samsung UN32H6350AF wall mounting bracket - 33.5in extension
Samsung UN32H6350AF articulating TV wall mount with 33in extension -All Star Mounts ASM-504M

 

 

 

 

 

 

 

 

  • Compatible with Samsung UN32H6350AF 32″ LED TV
  • VESA 200x200mm ready
  • Single arm swiveling wall mount for greater flexibility
  • 180° swivel left / right
  • +15 deg / -5 deg tilt
  • 33″ extension
  • 3.6″ depth from wall collapsed
  • Dual Stud mounting 16″ on center
  • Wall plate dimensions 12 H x 5″ W
  • Durable powder coat finish
  • Integrated cable management
  • 150-lb. maximum capacity
  • Available in Black only
  • Easy to install

Wall Mount World Tilting wall mounting bracket for Samsung UN40HU6950FXZA Smart HU6950 Ultra High Definition TV

Installer friendly Samsung Smart UN40HU6950FXZA HU6950 Ultra High Definition TV tilting wall mount. This sleek wall plate can accommodate a variety of stud spacing, allowing you to easily mount a Samsung UN40HU6950FXZA TV to wall studs that are 16″ or 24″ on center. This Samsung UN46F6950AFXZA ready wall mount comes with tension screws that allow you to set the force to adjust the tilt angle based on the TVs weight.

Samsung UN40HU6950FXZA wall mount requirements:
VESA 200x200mm compatible
Support 19.2 lbs

Samsung UN40HU6950FXZA tilting wall mount bracket
Samsung UN40HU6950FXZA tilting wall mount bracket

 

 

 

 

 

 

 

  • Fully compatible with Samsung UN40HU6950FXZA
  • Fingertip adjustable tilt mechanism
  • Depth from wall 1.65″
  • Adjustable Tilt 0/-12 degrees
  • Capacity 150 lbs.
  • Minimum VESA 100×100 (3 15/16 in.x 3 15/16 in.)
  • Maximum VESA 600×400 (23 5/8″ x 15 3/4″)
  • Mounts to wood studs on 16 in. – 24 in.centers
  • Heavy duty, steel construction
  • Includes all hardware and screws
  • No additional adapter plate or anything needed
  • Easy to install

Wall Mount World – Samsung UN40HU6900FXZA UHD HU6900 Series Smart TV – 40” Class (40.0” Diag.) – wall mounting bracket, low profile fixed position

Looking for a  Samsung UN40HU6900FXZA 40” UHD HU6900 Series Smart TV  ready ultra flat wall mount that is the ultimate in a low profile mounting solution. At Wall Mount World we made it simple to use using the “hook and click” installation with built-in kickstand feature that allows easy access for wiring behind your Samsung UN40HU6900FXZA  when mounted on the wall.

Samsung UN40HU6900FXZA wall mount requirements:
VESA 200x200mm compatible
Support 19.2 lbs

  • Click in place screen placement without use of tools
  • VESA 200x200mm ready
  • Low-profile, holds screen close to wall for a clean look
  • Built-in kickstand feature allows easy access for wiring
  • Pre-sorted hardware pack for easy installation to wood studs or concrete surfaces included

Samsung UN40HU6900FXZA low profile wall mount bracket - Crimson FU46

 

 

 

 

 

 

Product Code: CRIM-ULTRA-SAMUN40HU6900FXZA

 

Features

Fits Samsung Model: UN40HU6900FXZA
VESA 200x200mm compatible: Yes
Max VESA mounting pattern: 401x401mm
VESA mounting patterns: 75x75mm, 100x100mm, 200x100mm, 200x200mm, 200x300mm, 200x400mm, 300x200mm, 300x300mm, 300x400mm, 400x200mm, 400x300mm, 400x400mm
Depth from wall: 0.39″ (10mm)
Weight capacity:: 80lb (36kg)
Mounting surface: wood stud, concrete, cinder block or metal stud (accessory required)
Stud spacing: dual stud 16” on center
Construction: high-grade cold rolled steel
Product finish: scratch resistant epoxy powder coat
Mounting Hardware: Yes
Color: Black
Warranty: 10-years

Ultra Flat TV Wall Bracket for VIZIO E420i-A0 E-Series 42” LED TV (42.02″ Diag.)

Looking for a  VIZIO E420i-A0 E-Series 42” LED TV  ready ultra flat wall mount that is the ultimate in a low profile mounting solution. At Wall Mount World we made it simple to use using the “hook and click” installation with built-in kickstand feature that allows easy access for wiring behind your VIZIO E420i-A0 when mounted on the wall.

VIZIO E420i-A0 wall mount requirements:
VESA 200x200mm compatible
Support 21.3 lbs

  • Click in place screen placement without use of tools
  • VESA 200x200mm ready
  • Low-profile, holds screen close to wall for a clean look
  • Built-in kickstand feature allows easy access for wiring
  • Pre-sorted hardware pack for easy installation to wood studs or concrete surfaces included

Features

Fits Vizio Model: E420i-A0
VESA 400x400mm compatible: Yes
Max VESA mounting pattern: 401x401mm
VESA mounting patterns: 75x75mm, 100x100mm, 200x100mm, 200x200mm, 200x300mm, 200x400mm, 300x200mm, 300x300mm, 300x400mm, 400x200mm, 400x300mm, 400x400mm
Depth from wall: 0.39″ (10mm)
Weight capacity:: 80lb (36kg)
Mounting surface: wood stud, concrete, cinder block or metal stud (accessory required)
Stud spacing: dual stud 16” on center
Construction: high-grade cold rolled steel
Product finish: scratch resistant epoxy powder coat
Mounting Hardware: Yes
Color: Black
Warranty: 10-years